Wood products · specification comparison

xTool S1 40W vs OMTech Maker 60W for wood products

Compare a diode and a CO₂ candidate for your actual wood engraving or cutting batch. The better fit depends on the accepted finish, complete-batch time and installation.

Published September 30, 2026 · Manufacturer specifications · No hands-on testing

Compare the stated configuration

QuestionxTool S1 40WOMTech Maker MF1624-60
Laser typeBlue diodeCO₂
Stated laser power40W60W
Stated work area498 × 319 mm (40W configuration)16 × 24 in (also listed as 400 × 600 mm)
Source checked on2026-09-302026-09-30

Manufacturer statements checked September 30, 2026. Confirm the model, accessories and usable area for your fixture in a written quote. No price or measured performance is asserted.

Choose around the wood job

Engraving and repeated through-cutting are different acceptance tests. These two candidates use different laser types; the 40W and 60W ratings are not a proportional measure of output. Ask both suppliers to process the same stock, artwork and batch.

The S1 configuration matters

The xTool user guide lists 498 × 319 mm for the 40W configuration, and a different area for the 20W module. This comparison uses the 40W version. Do not substitute another module or conveyor dimensions for the standard usable area.

Require this batch record

  1. Stock supplier, species or plywood construction, adhesive, finish and thickness.
  2. Identical artwork, nesting, fixture, small details and finished edge criteria.
  3. Elapsed setup, loading, supervised processing, unloading, sanding or finishing and cleanup time.
  4. Attempted count, accepted count and rejected pieces with photos.
  5. Configuration, tested settings, air assist, cooling where required, extraction and maintenance assumptions.

Have the complete installation reviewed against the model manual and local requirements. A machine enclosure alone does not settle extraction, fire precautions or stock handling.

Compare complete installed costs

Use the itemized quote comparison for required accessories, delivery, installation and recurring costs. Then put your own complete-batch time and costs into the break-even calculator.

Current manufacturer sources

Direct manufacturer links; no affiliate tracking. These are candidates to investigate, not ranked recommendations.

Specification comparison only. We have not tested either machine or established a performance winner.