Metal marking · specification comparison

xTool F1 Ultra vs ComMarker B6 20W for metal marking

Compare two fiber marking candidates on your exact alloy and finish. Their advertised fields and power are starting points for a sample, not a production guarantee.

Published September 30, 2026 · Manufacturer specifications · No hands-on testing

Compare the stated configuration

QuestionxTool F1 UltraComMarker B6 20W (standard fiber)
Laser typeFiber + blue diodeFiber
Stated laser power20W fiber; 20W diode (separate sources)20W option; confirm the exact configuration
Stated work area220 × 220 mm; internal height 145 mm150 × 150 mm; 200 × 200 mm with optional lens
Source checked on2026-09-302026-09-30

Manufacturer statements checked September 30, 2026. Confirm the model, accessories and usable area for your fixture in a written quote. No price or measured performance is asserted.

If the xTool F1 Ultra is on your shortlist, assess its purchase cost against your own sales volume, operator time, consumables, and realistic batch yield: Estimate F1 Ultra ROI and break-even. That separate ROI guide contains a clearly disclosed affiliate purchase link; this specification comparison does not.

Use a bare-metal marking test

Specify alloy, finish, mark contrast or depth, part shape and a durability check. Coating removal and bare-metal marking are different results. This comparison concerns marking; it does not select machinery for metal cutting.

Compare the laser used for the sample

F1 Ultra has separate 20W fiber and 20W blue-diode sources. They are not one 40W fiber source. Compare its fiber result with the B6 standard-fiber 20W configuration on the same parts.

Do not mix B6 configurations

This page covers the standard B6 fiber listing, not B6 JPT MOPA. The listing's technical table states 20W/30W while its introductory copy also mentions 50W. Confirm the exact offered 20W model in writing. The 200 × 200 mm field requires an optional lens; do not assume it is included.

Price the complete guarded setup

ComMarker lists the single B6 machine as Class 4 and describes its enclosure or shield as optional. Its Class 1 statement depends on the enclosure. Ask for the classification and protective measures of the exact supplied system; do not assume glasses or a listing badge makes an open configuration suitable for your workplace.

Require this batch record

  1. Exact alloy, coating or surface finish, artwork, contrast/depth and durability criteria.
  2. Lens, marking field, focus, fixture and source used for the sample.
  3. Loading, alignment, marking, inspection, cleanup and reject count for a complete batch.
  4. Readability after the agreed wear or cleaning test, including codes if relevant.
  5. Written enclosure, guarding, extraction, training, software and support requirements.

Compare complete installed costs

Use the itemized quote comparison for required accessories, delivery, installation and recurring costs. Then put your own complete-batch time and costs into the break-even calculator.

Current manufacturer sources

Direct manufacturer links; no affiliate tracking. These are candidates to investigate, not ranked recommendations.

Specification comparison only. We have not tested either machine or established a performance winner.