Comparison table: capability and purchase price
| Machine | Laser source / stated power | Stated working area | Checked purchase price (USD) |
|---|---|---|---|
| xTool S1 40W | Blue diode · 40W | 498 × 319 mm (40W configuration) | $1,699.00 · 40W / 40W Basic Bundle Below purchase cap; $301.00 left before remaining costs |
| xTool P2S | CO₂ · 55W | 600 × 305 mm (about 23.6 × 12.0 in) | $2,999.00 · P2S Standalone Excluded: above purchase cap by $999.00 |
| OMTech Maker MF1624-60 | CO₂ · 60W | 16 × 24 in (also listed as 400 × 600 mm) | $2,399.99 · Rotary Package Excluded: above purchase cap by $399.99 |
| xTool F1 Ultra | Fiber + blue diode · 20W fiber; 20W diode (separate sources) | 220 × 220 mm; internal height 145 mm | $2,999.00 · F1 Ultra Standalone Excluded: above purchase cap by $999.00 |
Price check: 2026-10-08. Prices exclude additional setup, tax and delivery; discounts, availability and bundle contents may change. Recheck the exact configuration before ordering. Specifications retain their individual source-check dates below.
Quick decision: preserve the remaining setup budget
Treat $2,000 as an all-in ceiling unless you deliberately have a separate installation budget. At the checked S1 bundle price, $301.00 must cover every additional cost inside that ceiling. Obtain itemized extraction, delivery, taxes, fixtures and startup stock costs before treating the bundle as affordable.
Purchase price versus a usable shop
Only the selected S1 40W Basic Bundle in this four-machine shortlist has a checked purchase price below $2,000. Other power modules and bundles are not interchangeable quotes, and a Basic Bundle must not be described as a purifier or rotary package without checking its contents. Higher-priced models appear below as excluded alternatives, not budget picks.
Best fit and use-case matrix
Investigate small wood personalization where a sample establishes finish, positioning and complete operator time. If your revenue depends on cutting clear acrylic, do not spend the ceiling on the wrong source type. If bare-metal traceability is essential, obtain a suitable marking quote or outsource the job rather than assuming a diode will meet the specification.
Who should buy
Consider this route only when the exact material test passes and a written setup quote fits the remaining cash. Count existing extraction or fixtures only when they are suitable and their installation has been confirmed. Existing equipment is not automatically compatible.
Who should NOT buy
Defer when the $301.00 remainder cannot cover required setup, when the work area fails the stock, or when expected sales are the only argument for stretching the cap. A small outsourced pilot can establish demand and processing requirements without committing the whole cash reserve.
Workflow before upgrading
Time a representative engraving batch including loading, supervision, finishing and rejected blanks. Compare outsourcing the same accepted batch with owning the machine. A lower sticker price can still be the more expensive route per accepted item when handling or rejection consumes your selling time.
Realistic setup-cost categories
- Equipment and accessories: the exact module, bed, fixtures, rotary and any required cooling or air assist.
- Getting operational: delivery access, electrical work, extraction and exhaust routing, installation, training and one-time software.
- Operating costs: blanks, rejects, optics or filters, maintenance reserve, software subscriptions and complete operator time.
- Cash reserve: packaging, selling costs, working capital and lower-sales months; avoid counting a cost twice.
Itemize the installed quote before committing to the machine price.
Throughput, safety and software checks
Ask for a timed complete batch using your material and artwork: setup, loading, supervision, processing, finishing, inspection and cleanup. Advertised motion speed is not sellable units per hour. Confirm material hazards, enclosure and interlocks, exhaust routing, electrical requirements and required supervision against the exact manual and local requirements. Never leave a laser job unattended. Demonstrate your file format, computer and required accessories in the proposed software; confirm license inclusions and ongoing charges in writing.
Use-case matrix: investigate, then validate
| Paid job | Starting branch | Acceptance check |
|---|---|---|
| Clear acrylic signs | CO₂ | Edge, assembly fit and sheet yield |
| Wood personalization | Diode or CO₂ | Contrast, finish and complete handling time |
| Bare-metal marks | Fiber investigation | Alloy, durability, code readability and fixture fit |
This is a starting decision map, not a guarantee that a named machine processes every material or thickness.
Sources and limits
- xTool S1 40W specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool P2S specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- OMTech Maker MF1624-60 specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool F1 Ultra specifications — 2026-09-30; selected configuration price data — 2026-10-08.
No machine has been tested by MakerSpec Lab. Specifications are manufacturer statements; business-fit judgments are editorial reasoning, not measured comparative performance. No production rate, warranty advantage, customer demand or profit forecast is asserted.
Check your shortlist with the manufacturer
Direct manufacturer links; no affiliate tracking. Request the configuration, sample and complete quote before purchase.
Continue the purchase decision
Fit Finder: prepare your sample brief · Break-even calculator
P2S versus MF1624 for acrylic · S1 versus MF1624 for wood · F1 Ultra versus B6 for metal