Comparison table: capability and purchase price
| Machine | Laser source / stated power | Stated working area | Checked purchase price (USD) |
|---|---|---|---|
| xTool S1 40W | Blue diode · 40W | 498 × 319 mm (40W configuration) | $1,699.00 · 40W / 40W Basic Bundle |
| xTool P2S | CO₂ · 55W | 600 × 305 mm (about 23.6 × 12.0 in) | $2,999.00 · P2S Standalone |
| OMTech Maker MF1624-60 | CO₂ · 60W | 16 × 24 in (also listed as 400 × 600 mm) | $2,399.99 · Rotary Package |
| xTool F1 Ultra | Fiber + blue diode · 20W fiber; 20W diode (separate sources) | 220 × 220 mm; internal height 145 mm | $2,999.00 · F1 Ultra Standalone |
Price check: 2026-10-08. Prices exclude additional setup, tax and delivery; discounts, availability and bundle contents may change. Recheck the exact configuration before ordering. Specifications retain their individual source-check dates below.
Quick decision: start with a sellable job
Write one acceptance brief before choosing a model: exact blank supplier, material, dimensions, finish, artwork and batch size. If you cannot obtain a representative sample or safely install extraction, postpone the purchase. A machine that fits your sheet but fails the required edge or mark is not a bargain.
Best fit by business type
Acrylic sign shops should compare P2S and MF1624 CO₂ configurations on a common sample. Wood personalization shops can investigate S1 where the sample fits; recurring wood cutting merits a CO₂ comparison. Metal tag and part-marking shops should investigate F1 Ultra and the existing fiber comparison. None of these recommendations establishes your production rate.
Machine type explanation
Diode, CO₂ and fiber describe different laser sources, not interchangeable power scales. Blue diode is not a substitute for a clear-acrylic cutting workflow. Fiber marking and desktop CO₂ sheet cutting serve different jobs. Use the material guides for a sample brief rather than transferring settings between machines.
A purchase decision in four gates
First require the sample to pass your edge or mark specification. Second require installation and supervision to fit the premises. Third require the complete quote to fit available cash after working capital. Fourth require positive contribution and plausible sales under lower-demand assumptions. Failure at any gate means revise or defer, even when the vendor offers a discount.
Who should buy
An operator with a defined product, a repeatable accepted sample, a safe workspace and a cash reserve can use this shortlist to request comparable quotes. Prefer the least costly complete setup that passes the job and support requirements, not the highest nominal wattage.
Who should NOT buy
Do not buy to discover whether anyone wants your product, to replace an unverified outsourcing price, or to solve both sheet cutting and bare-metal marking without a tested plan. If required stock exceeds the machine field or safe extraction cannot be arranged, outsource a pilot batch before buying.
Realistic setup-cost categories
- Equipment and accessories: the exact module, bed, fixtures, rotary and any required cooling or air assist.
- Getting operational: delivery access, electrical work, extraction and exhaust routing, installation, training and one-time software.
- Operating costs: blanks, rejects, optics or filters, maintenance reserve, software subscriptions and complete operator time.
- Cash reserve: packaging, selling costs, working capital and lower-sales months; avoid counting a cost twice.
Itemize the installed quote before committing to the machine price.
Throughput, safety and software checks
Ask for a timed complete batch using your material and artwork: setup, loading, supervision, processing, finishing, inspection and cleanup. Advertised motion speed is not sellable units per hour. Confirm material hazards, enclosure and interlocks, exhaust routing, electrical requirements and required supervision against the exact manual and local requirements. Never leave a laser job unattended. Demonstrate your file format, computer and required accessories in the proposed software; confirm license inclusions and ongoing charges in writing.
Use-case matrix: investigate, then validate
| Paid job | Starting branch | Acceptance check |
|---|---|---|
| Clear acrylic signs | CO₂ | Edge, assembly fit and sheet yield |
| Wood personalization | Diode or CO₂ | Contrast, finish and complete handling time |
| Bare-metal marks | Fiber investigation | Alloy, durability, code readability and fixture fit |
This is a starting decision map, not a guarantee that a named machine processes every material or thickness.
Sources and limits
- xTool S1 40W specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool P2S specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- OMTech Maker MF1624-60 specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool F1 Ultra specifications — 2026-09-30; selected configuration price data — 2026-10-08.
No machine has been tested by MakerSpec Lab. Specifications are manufacturer statements; business-fit judgments are editorial reasoning, not measured comparative performance. No production rate, warranty advantage, customer demand or profit forecast is asserted.
Check your shortlist with the manufacturer
Direct manufacturer links; no affiliate tracking. Request the configuration, sample and complete quote before purchase.
Continue the purchase decision
Fit Finder: prepare your sample brief · Break-even calculator
P2S versus MF1624 for acrylic · S1 versus MF1624 for wood · F1 Ultra versus B6 for metal