Comparison table: capability and purchase price
| Machine | Laser source / stated power | Stated working area | Checked purchase price (USD) |
|---|---|---|---|
| xTool P2S | CO₂ · 55W | 600 × 305 mm (about 23.6 × 12.0 in) | $2,999.00 · P2S Standalone |
Price check: 2026-10-08. Prices exclude additional setup, tax and delivery; discounts, availability and bundle contents may change. Recheck the exact configuration before ordering. Specifications retain their individual source-check dates below.
Product cost assumptions
Standalone is not an installed sign shop. Add any required handling, fixtures and accessories to the equipment allowance. Obtain a separate quote for extraction, delivery, power, training and initial stock. Do not treat a pass-through or other optional arrangement as part of the standard quote without verification.
Sheet yield and material cost input
Divide the actual sheet cost by the attempted products your nesting layout produces, allowing for unusable offcuts and preparation. Enter that as cost per production attempt; enter rejected attempts separately so material is not counted twice. Include adhesive, paint or other attempt-level consumables where applicable.
Workflow and gross profit per order
One accepted item is the model unit. If an order contains several signs, convert revenue and costs to the same unit before comparing. The model reports contribution after variable costs, fees and owner time; it is not accounting net profit. Include design, cutting, cleaning, assembly and packaging at the appropriate stage.
Who should buy / who should NOT buy
Consider P2S when the accepted acrylic or wood sample, stock dimensions and complete installed quote fit the shop. Defer if the purchase depends on bare-metal marking, unverified cutting thickness or orders that have not been validated. Use the existing P2S versus MF1624 comparison before choosing a CO₂ configuration.
Sensitivity: lower yield and slower finishing
Compare half-demand with base demand, then revise complete minutes and reject rate from a real batch. Finishing and assembly may be the bottleneck even when cutting is quick. Capacity in this model is based on your entered operator time, not a manufacturer-certified P2S production rate.
Realistic setup-cost categories
- Equipment and accessories: the exact module, bed, fixtures, rotary and any required cooling or air assist.
- Getting operational: delivery access, electrical work, extraction and exhaust routing, installation, training and one-time software.
- Operating costs: blanks, rejects, optics or filters, maintenance reserve, software subscriptions and complete operator time.
- Cash reserve: packaging, selling costs, working capital and lower-sales months; avoid counting a cost twice.
Itemize the installed quote before committing to the machine price.
Throughput, safety and software checks
Ask for a timed complete batch using your material and artwork: setup, loading, supervision, processing, finishing, inspection and cleanup. Advertised motion speed is not sellable units per hour. Confirm material hazards, enclosure and interlocks, exhaust routing, electrical requirements and required supervision against the exact manual and local requirements. Never leave a laser job unattended. Demonstrate your file format, computer and required accessories in the proposed software; confirm license inclusions and ongoing charges in writing.
Use-case matrix: investigate, then validate
| Paid job | Starting branch | Acceptance check |
|---|---|---|
| Clear acrylic signs | CO₂ | Edge, assembly fit and sheet yield |
| Wood personalization | Diode or CO₂ | Contrast, finish and complete handling time |
| Bare-metal marks | Fiber investigation | Alloy, durability, code readability and fixture fit |
This is a starting decision map, not a guarantee that a named machine processes every material or thickness.
Units and months to break even
The equipment starting value is the checked standalone price. All remaining defaults are illustrative assumptions shown in the fields below, not supplier quotes or forecasts. Replace them with your own assumptions. Contribution is selling price minus variable costs, fees and time allowance. Simplified startup recovery units = one-time setup ÷ positive contribution, rounded up, ignoring monthly fixed costs; use target monthly sales below when fixed costs apply. Months = one-time setup ÷ positive monthly surplus. Neither measure guarantees demand or return.
Update the estimate to calculate startup recovery units.
Enter your own economics
Estimate the sales and operator time needed to cover your setup. The starting numbers are an illustrative example, not a machine quote or a forecast.
Your estimate
- Total one-time setup
- —
- Cost per sold item, including time
- —
- Contribution per sold item
- —
- Time-based capacity / month
- —
- Monthly sales for your recovery target
- —
A scenario based on your inputs. It does not establish buyer demand, machine throughput or a guaranteed return. Surplus is after the operator-time allowance, before taxes and financing.
What if sales change?
Each scenario uses the same price, costs and time. Sales are capped by your available production hours. Capacity is an estimate, not a tested machine specification.
| Sales scenario | Demand / month | Sales after time cap | Production hours | Monthly surplus | Recovery (months) |
|---|
Turn the plan into a supplier request.
Copy this draft and add your exact material, artwork and finish. Ask vendors to demonstrate a complete batch before using their cycle time in your estimate.
Check which machine class fits your materialHow the calculation works
- Accepted yield = 1 − rejection rate.
- Cost per sold item = (cost per attempt + operator minutes × hourly time value ÷ 60) ÷ accepted yield + cost per sale + percentage sales fees.
- Contribution = selling price − cost per sold item.
- Monthly operating break-even = fixed monthly costs ÷ positive contribution, rounded up to a whole item.
- Monthly surplus = capped sales × contribution − fixed monthly costs.
- Simple recovery = upfront setup ÷ positive monthly surplus. If surplus is zero or negative, there is no positive recovery period.
- Target sales = (monthly fixed costs + upfront setup ÷ target months) ÷ positive contribution, rounded up.
The basic break-even formula follows the U.S. Small Business Administration’s break-even explanation. The rejection, time allowance, capacity and recovery extensions are MakerSpec Lab’s stated planning assumptions.
What to check outside this model
This is a one-product model with constant price, cost, yield and time. It assumes every produced accepted item is sold within the month. It excludes sales tax, income tax, financing, depreciation, working capital, inventory timing, ramp-up and equipment resale value. Add every applicable operating expense to the relevant field; use a separate cash-flow model for financing. It does not prove that the sales or sample result can be achieved.
Rejected attempts consume a full share of material and operator time; per-sale costs and sales fees apply only to sold items. Production hours include the time you allocate here. Measure machine availability and other bottlenecks separately. A zero time value means your labor is unpriced in the estimate.
Next: review the material buying guides or the acrylic machine specification comparison.
Estimate text
Select and copy this text if a file download is unavailable. Inputs stay in this tab.
Sources and limits
- xTool P2S specifications — 2026-09-30; selected configuration price data — 2026-10-08.
No machine has been tested by MakerSpec Lab. Specifications are manufacturer statements; business-fit judgments are editorial reasoning, not measured comparative performance. No production rate, warranty advantage, customer demand or profit forecast is asserted.
Check your shortlist with the manufacturer
Direct manufacturer links; no affiliate tracking. Request the configuration, sample and complete quote before purchase.
Continue the purchase decision
Fit Finder: prepare your sample brief · Break-even calculator
P2S versus MF1624 for acrylic · S1 versus MF1624 for wood · F1 Ultra versus B6 for metal