Comparison table: capability and purchase price
| Machine | Laser source / stated power | Stated working area | Checked purchase price (USD) |
|---|---|---|---|
| xTool S1 40W | Blue diode · 40W | 498 × 319 mm (40W configuration) | $1,699.00 · 40W / 40W Basic Bundle |
| xTool P2S | CO₂ · 55W | 600 × 305 mm (about 23.6 × 12.0 in) | $2,999.00 · P2S Standalone |
| OMTech Maker MF1624-60 | CO₂ · 60W | 16 × 24 in (also listed as 400 × 600 mm) | $2,399.99 · Rotary Package |
| xTool F1 Ultra | Fiber + blue diode · 20W fiber; 20W diode (separate sources) | 220 × 220 mm; internal height 145 mm | $2,999.00 · F1 Ultra Standalone |
Price check: 2026-10-08. Prices exclude additional setup, tax and delivery; discounts, availability and bundle contents may change. Recheck the exact configuration before ordering. Specifications retain their individual source-check dates below.
Quick verdict
For acrylic signs, compare P2S with MF1624 and request identical material and artwork. For a wood engraving workflow, include S1 only if its sample meets the job. For metal marking, F1 Ultra belongs in the fiber branch; this OMTech CO₂ listing does not provide a like-for-like bare-metal marking comparison.
Workflow and setup burden
Ask each supplier for an installation bill of materials: cooling, air assist, ducting, exhaust termination, handling, power and software. A desktop label does not prove that extraction or electrical work is included. Compare the route from delivery to the first accepted batch, including who provides installation support.
Software consideration
Require a demonstration using your real file format and computer. The OMTech listing offers packages with LightBurn; do not assume every package includes a license. Confirm software and controller compatibility, offline requirements, artwork import, placement and rotary operation in the written configuration. Compare training time as an operating cost.
Where each loses
xTool loses your decision if the quoted usable field, material result or total installation cost fails the brief. OMTech loses if the required cooling, handling, software or support arrangement cannot be delivered within your constraints. Brand familiarity and headline motion speed cannot rescue a failed sample.
Decision tree
Clear acrylic or recurring sheet cutting: go to the P2S versus MF1624 comparison. Wood engraving: compare S1 with the CO₂ alternative on your batch. Bare-metal marks: go to the F1 Ultra versus B6 comparison. No clear material brief: complete the Fit Finder first. Then compare installed quotes and lower-sales break-even.
Commercial terms to compare
Request written warranty exclusions, consumables, local service coverage, return freight and lead time for the exact configuration. No uniform warranty duration or response-time advantage is asserted here. Ask who pays if a machine arrives damaged or fails a production acceptance test.
Realistic setup-cost categories
- Equipment and accessories: the exact module, bed, fixtures, rotary and any required cooling or air assist.
- Getting operational: delivery access, electrical work, extraction and exhaust routing, installation, training and one-time software.
- Operating costs: blanks, rejects, optics or filters, maintenance reserve, software subscriptions and complete operator time.
- Cash reserve: packaging, selling costs, working capital and lower-sales months; avoid counting a cost twice.
Itemize the installed quote before committing to the machine price.
Throughput, safety and software checks
Ask for a timed complete batch using your material and artwork: setup, loading, supervision, processing, finishing, inspection and cleanup. Advertised motion speed is not sellable units per hour. Confirm material hazards, enclosure and interlocks, exhaust routing, electrical requirements and required supervision against the exact manual and local requirements. Never leave a laser job unattended. Demonstrate your file format, computer and required accessories in the proposed software; confirm license inclusions and ongoing charges in writing.
Use-case matrix: investigate, then validate
| Paid job | Starting branch | Acceptance check |
|---|---|---|
| Clear acrylic signs | CO₂ | Edge, assembly fit and sheet yield |
| Wood personalization | Diode or CO₂ | Contrast, finish and complete handling time |
| Bare-metal marks | Fiber investigation | Alloy, durability, code readability and fixture fit |
This is a starting decision map, not a guarantee that a named machine processes every material or thickness.
Sources and limits
- xTool S1 40W specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool P2S specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- OMTech Maker MF1624-60 specifications — 2026-09-30; selected configuration price data — 2026-10-08.
- xTool F1 Ultra specifications — 2026-09-30; selected configuration price data — 2026-10-08.
No machine has been tested by MakerSpec Lab. Specifications are manufacturer statements; business-fit judgments are editorial reasoning, not measured comparative performance. No production rate, warranty advantage, customer demand or profit forecast is asserted.
Check your shortlist with the manufacturer
Direct manufacturer links; no affiliate tracking. Request the configuration, sample and complete quote before purchase.
Continue the purchase decision
Fit Finder: prepare your sample brief · Break-even calculator
P2S versus MF1624 for acrylic · S1 versus MF1624 for wood · F1 Ultra versus B6 for metal